Suitable for the distillation of strong alkaline or acid products as well as very aggressive solvents
Consisting of:
* Cat. No. B 281-03: Flat Flange Reaction Vessel NW 100
* Cat. No. B 282-02: Flat Flange Gaskets NW 100
* Cat. No. B 283-02: Flat Flange Lids NW 100
* Cat. No. B 284-02: Flat Flange Joining Pieces NW 100
* Cat. No. B 285-01: Dropping funnels 125 ml with cone NS 29/32
* Cat. No. B 291-02: Liebig Condenser 300 mm
* Cat. No. B 290-03: Distillation Thermometer 0/+250:1C°
* Cat.No. C 376-12: Moon-Shaped Stirrer Shaft Ø 10 x 350 mm
* Cat. No. B 287-03: Thermometer for Flask 0/+250:1C°, Ø 7 x 450 mm
* Cat. No. B 286-03: Thermometer Holder NS 29/32
* Cat. No. B 288-02: Stirrer Bearing NS 29/32
* Cat. No. B 289-02: Distillation Head 2 x NS 29/32
* Cat. No. B 292-02: Receiver Adaptor
* Cat. No. B 293-02: Vacuum Stopcocks
* Cat. No.. A 158-06: Round Bottom Flask with Ground Joint NS 29/32, 100 ml
B271 BOLA PTFE Flat Flange Reaction Vessels thick wall with round bottom and smooth interior surface, flat flange with circular groove as per DIN 12 214. Can be heated by a thermostat or an electrical heating mantle B210 BOLA Flat Flange Lids B150 BOLA Reactor Lids BOLA Joining Pieces
BOLA Screw In Fittings GL, PTFE. BOLA Screw In Stopper, PTFE. BOLA Screw In Connector with Ground Joint. BOLA Screw In Stirrer Bearings, PTFE. BOLA Screw In Stopcocks, 2-Way. BOLA Cold Trap.
B285 BOLA Dropping Funnel. B286 BOLA Thermometer Supporting Device. B287 BOLA Flask Thermometer. B288 BOLA Standard Ground Stirrer Bearing. B289 BOLA Distillation Head. B291 BOLA Liebig Condenser. B292 BOLA Receiver Adapter. B293 BOLA Vacuum Stopcock. B295 BOLA-Liebig Vacuum Condensers. B301 BOLA Vertical Liebig Condenser. B302 BOLA Standard Ground Distributor. B303 BOLA Link. B304 BOLA Standard Ground Joint Tube Fitting
B170 BOLA Reactor Lid EX Made of static dissipative PTFE-EX. Suitable for glass reactors DN 60 with SCHOTT flat flange. With NPT screw-in threads for connection of transition fittings. Bore with female thread M5x6 for earthing connection on the upper side of the lid. B172 BOLA Screw In Fittings GL EX, PTFE For connection to BOLA Reactor Lids as GL necks. With hexagonal gripping surface in standard wrench size. Earthing is made via a connection on the reactor lid.B173 BOLA Screw In Stopper EX, PTFE EX.For connection to BOLA Reactor Lids. For closure of non-used connectors. With hexagonal gripping surface in standard wrench size. Earthing is made via a connection on the Reactor Lid. B174 BOLA Screw In Connector with Ground Joint EX, PTFE EX Made of static dissipative PTFE-EX. For connection to BOLA Reactor Lids. Connection with ground socket. With hexagonal gripping surface in standard wrench size. Earthing is made via a connection on the reactor lid.
