|
ALJ-A01S05 |
Protective working cover over keyboard and housing, standard, can be reordered, scope of delivery: 5 items |
$94.00 |
|  |
|
ALJ-A02 |
Evaporation trap, minimises faults through evaporation when using pipettes for small volumes of 10 ml to 10 ml |
$1,077.00 |
| |
|
ALJ-A03 |
Draught shield rear panel with integrated ioniser to neutralise electrostatic charge |
$932.00 |
| |
|
ALJ-A04 |
Protective working cover |
$78.00 |
| |
|
ALS-A02 |
Protective working cover |
$78.00 |
| |
|
ALS-A02S05 |
Protective working cover over keyboard and housing, standard, can be reordered, scope of delivery: 5 items |
$94.00 |
| |
|
ALT-A02 |
Set for density determination of liquids and solids with density ?/? 1, only for models with readout [d] = 0,001 g |
$1,121.00 |
| |
|
ASU-01 |
Adjustment device for regular adjustment of the sound level meter |
$452.00 |
| |
|
ASU-02 |
Foam protective cover |
$42.00 |
| |
|
ATB-US01 |
Ultrasound probe aluminium |
$343.00 |
| |
|
ATB-US02 |
External measuring head, 5 MHz, ? 12 mm, for hot test materials: Measuring range (steel) 3-200 mm at temperatures of up to 300°C |
$423.00 |
| |
|
ATB-US03 |
Ultrasound contact gel, refill pack, approx. 70 ml |
$81.00 |
| |
|
ATB-US06 |
External measuring head, 5 MHz, ? 8 mm |
$190.00 |
| |
|
ATB-US07 |
Calibration foils for increased measuring accuracy (covers the range from 20 up to 2000 m, with 3 % tolerance) |
$197.00 |
| |
|
ATE 01 |
Sensor Type |
$199.00 |
| |
|
ATE 02 |
Sensor Type |
$212.00 |
| |
|
ATG 01 |
External sensor, Type FN |
$241.00 |
| |
|
ATU-US01 |
Ultrasound probe aluminium; |
$365.00 |
| |
|
ATU-US02 |
External measuring head, 7 MHz, ? 6 mm, for thin test materials: Measuring range 0,7580 mm (steel) |
$248.00 |
| |
|
ATU-US09 |
Ultrasound probe aluminium; |
$248.00 |
| |
|
ATU-US10 |
External measuring head (Pulse-Echo), 5 MHz, 10 mm, transducer at an angle of 90° |
$248.00 |
| |
|
ATU-US11 |
Paper roll, 1 piece, for SAUTER AHN-02 |
$55.00 |
| |
|
ATU-US12 |
External measuring head, 5 MHz, ? 10 mm, for echo-echo measuring |
$532.00 |
| |
|
BFB-A03 |
Cable with special length 15 m |
$314.00 |
| |
|
BFN-A01 |
Ascending ramp for KERN BFN |
$2,170.00 |
| |
|
BFN-A02 |
Stable pit frame to install the weighing bridge so you can drive straight on |
$1,734.00 |
| |
|
BFN-A03 |
Pair of base plates to fix the weighing bridge to the floor |
$168.00 |
| |
|
BFN-A05 |
Ascending ramp including fixing board between weighing bridge and ascending ramp, stainless steel, W D H 1000mm x 750mm x 85 mm |
$1,880.00 |
| |
|
BFN-A06 |
Stable pit frame, stainless steel, for models with weighing plate size W D H 1000mm 1000mm 80mm |
$1,298.00 |
| |
|
BFS-A01N |
Ascending ramp, steel, lacquered, W D H 1000mm 745mm 90 mm |
$612.00 |
| |
